Specification Snapshot
| Item | Detail |
|---|---|
| Product Name | Rolex Daytona m126500LN-0002 replica |
| Model | m126500LN-0002 |
| Case Size | 40mm |
| Case Material | 904L stainless steel |
| Bracelet Material | 904L stainless steel |
| Crystal | Sapphire crystal |
| Movement | Clone 4131 automatic mechanical chronograph movement |
| Water Resistance | 50 meters |
| Dial Color | Black |
| Bezel | Black ceramic bezel with engraved tachymeter scale |
BUILD — 904L Stainless Steel Oyster Case Architecture
The case of 40 mm is made from 904L stainless steel and features both brushed finish vertically and polished sides. Its curved lugs flow directly into the solid end links, creating a compact and integrated case-and-bracelet structure.
The Rolex Daytona m126500LN-0002 replica features a screw-down crown positioned between protective crown guards, together with screw-lock chronograph pushers above and below the crown. Polished push buttons, grooved locking rings and crown with engraving represent clearly marked functional elements of the right side of the case.
The stainless-steel case back serves to complete the Oyster case design. The fluting of the edges of the case back helps it to fit tightly to the middle case part.
DIAL — Black Chronograph Layout with Steel-Rimmed Subdials
Dial color: Glossy black
Hour markers: Applied pointed geometric markers
Hands: Baton-style hour and minute hands with a slender central chronograph seconds hand
Display: Three-subdial chronograph configuration
Accent: Red “DAYTONA” lettering above the 6 o’clock subdial
Luminous details: Light-colored inserts on the hands and hour markers
The black dial is arranged around three individually recessed chronograph subdials, each surrounded by a bright silver-toned steel ring:
3 o’clock: 30-minute chronograph counter
6 o’clock: Running seconds display
9 o’clock: 12-hour chronograph counter
Applied geometric hour markers are positioned around the outer minute track. The markers at 3, 6, and 9 o’clock are shortened to accommodate the three subdials, while the remaining positions use elongated, pointed markers. The red arched “DAYTONA” inscription adds a concentrated color accent above the lower register.
BEZEL — Black Ceramic Tachymeter Scale
Material: Black ceramic
Scale type: Engraved tachymeter scale
Markings: Silver-toned numerals, triangles, and index graduations
Upper inscription: “UNITS PER HOUR”
Construction: Fixed bezel
The black ceramic bezel is surrounded by a continuously polished surface and sharp tachymeter scale. The numerals and markers in silver appear raised and create contrast on the black ceramic background, thus making the markings clear all around the bezel circumference.
The scale is designed for calculating average speed over a known distance when used together with the central chronograph seconds hand. The clean edge of the watch’s front and its seamless transition into the sapphire glass make its front look highly precise and layered.
BRACELET — 904L Stainless Steel Oyster-Link Design
Type: Three-link Oyster-type bracelet
Material: 904L stainless steel
Center links: Polished finish
Outer links: Brushed finish
End links: Solid, integrated construction
Clasp: Folding safety clasp
This bracelet has large central links surrounded by thinner outer ones. The polishing of the central links gives high contrast between them and the brushed outer parts. The sides are polished to match the shape of the watch’s case.
Solid end links connect closely to the lugs with minimal visible spacing. The folding clasp maintains the same pattern of brushing and polishing finishes as well as incorporating engravings of stainless steel inside the clasp. The design of the links used in the bracelet makes it foldable without losing its strength and structure.
Automatic Movement Details
The watch is powered by a clone 4131 automatic mechanical chronograph movement. It supports conventional hour, minute, and running-seconds indications together with central chronograph seconds, a 30-minute counter, and a 12-hour counter.
Chronograph operation is controlled by the two screw-lock pushers on the right side of the case. The upper pusher starts and stops the timing function, while the lower pusher resets the chronograph hands after timing has stopped.
The automatic winding system is designed to replenish the movement’s power through rotor motion. Time adjustment and manual winding are operated through the screw-down crown. Unscrewing the crown provides access to the winding and time-setting positions, while securing it against the case helps maintain the stated water-resistance structure.
FAQ
Q: What is the case size?
A: The case measures 40mm.
Q: What is the model number?
A: The model number of the watch is m126500LN-0002.
Q: What is the color of the dial?
A: The watch has a black chronograph dial with silver colored subdial rings.
Q: What is the purpose of the three subdials?
A: The subdial at 3 o’clock displays 30 chronograph minutes, the subdial at 6 o’clock displays running seconds and the subdial at 9 o’clock displays 12 chronograph hours.
Q: What materials are used to manufacture the case and bracelet?
A: The case and the bracelet are made of 904L stainless steel.
Q: What type of crystal is fitted?
A: The watch is equipped with a sapphire crystal.
Q: What kind of bezel does the watch have?
A: The watch has a black ceramic fixed bezel with a tachymeter scale.
Q: What movement is installed in the watch?
A: It is equipped with a clone 4131 automatic mechanical chronograph caliber.
Q: What is the water resistance of the watch?
A: The watch has a water resistance of 50 meters. Pressure tests are advisable prior to any water contact, and crown and pusher use under water is not recommended.
Reviews
There are no reviews yet.